Recent Posts

Pages: 1 [2] 3 4 5 ... 10
Welcome and Introductions / Re: Forum back up 2017 Nice!
« Last post by TorchMan on March 18, 2017, 10:01:57 PM »

Or should I say hello again? It's been a long while since I've visited the online flashlight community. I'll look around over the next few days to see what's new. Not much in the Mr. Bulk section of recent. I hope he's okay.

Still have all my lights and a few new ones as well!

Welcome and Introductions / Forum back up 2017 Nice!
« Last post by Lips on March 01, 2017, 10:38:01 AM »
Glad to see her back online!
Lights Buy/Sell/Trade / Re: Vital Gear Sales - Dec/ January 2016
« Last post by Lightknot on January 31, 2016, 04:55:46 PM »
Thread closed
Lights Buy/Sell/Trade / DS21 HI CREE XP-L High-Intensity LED Flashlight
« Last post by skilhunt on January 07, 2016, 11:55:05 AM »
DS21 New brother coming — DS21 HI tiny super thrower EDC led flashlight.

Tiny Super Thrower Flashlight
LED: CREE XP-L HI (High-Intensity)
Max output: 800 Lumens
Max runtime:120 hrs
Beam Distance: 219 meters
More details
Lights Buy/Sell/Trade / Re: Vital Gear Sales - Dec/ January 2016
« Last post by Lightknot on December 20, 2015, 06:26:00 AM »
 December / January 2016
Lots of  Vital Gear available!
We also have knives and EDC gear on the website.
Lights Buy/Sell/Trade / New release! H15 450 Lumens AA TIR LED headlamp
« Last post by skilhunt on November 19, 2015, 10:27:50 AM »
The H15 LED headlamp is a powerful with 450 ANSI Lumens and compact lightweight design flashlight/headlamp that running on one AA battery.

-Super bright & latest CREE XML-2 U3 LED
-Flat tail cap with strong magnet to secure to ferrous surfaces
-Side switch for simple and convenient operation
-4 brightness level,strobe mode,beacon mode

More details
Other Gear / Re: Lanyards
« Last post by Stormdrane on November 17, 2015, 03:28:20 AM »
A few pics since my last post with lanyards, edc stuff and flashlights.

Lights Buy/Sell/Trade / New M4D intelliget LCD digicharger release
« Last post by skilhunt on November 04, 2015, 08:38:58 AM »

M4D LCD Digicharger:
High compatibility, compatible with Li-ion, LiFePO4, IMR, Ni-MH and Ni-Cd batteries.
Can charge 4pcs batteries all with 1000mA charging current at the same time, fast charge to save your time.
One button easy control all charging status.
Four battery channels independent control.
Soft-start function, to avoid damage from large current charge and safely charge small capacity batteries.
Four charging current options for all channels. ( 300mA, 500mA, 700mA and 1000mA )
LCD display to you each of batteries charging status include charging current, charging capacity,
charging time, charging voltage. Free control the charging process at any time.
Reverse polarity protection,to protect from improper battery installation.
Short-circuit, over-load and over-heat protected, intelligent circuits.
Three-stage charge (CC, CV and Trickle Charge).
Use new fire-retardant flame-resistant material for safety.
0V activation function can wake up the over-discharged sleeping batteries
USB output function, can be portable power source for your mobile devices.
The M4D digicharger is an universal, intelligent LCD charger compatible with almost all
types of rechargeable batteries thus eliminating the need to own several chargers. The
M4D is a real fast charger that can charge 4pcs batteries all with 1000mA charging current at the same time.
The M4D is able to automatically identify Li-ion, IMR, Ni-MH and Ni-Cd rechargeable batteries and apply an appropriate charging mode
( Constant Charge Current (CC), Constant Charge Voltage (CV) and Trickle Charge).
The M4D’s LCD display to you each of batteries charging status include charging current, charging time, charging voltage, charging capacity. The user can also manually choose the current by the switch button.
The charger default to charge Li-ion/ IMR or Ni-MH / Ni-Cd. Hold the MODE button 5 seconds switch to LiFePO4 charging mode and LCD display as “LiFePO4”. Hold the MODE button 5 seconds switch back to the original charging mode.
The charger default charging current at 300mA. Hold the MODE button 2 seconds to switch charging current at 300mA/500mA/700mA /1000mA. After selection 8 seconds, the charger start to charge.
Press the MODE button, switch to display battery charging time or charging capacity.
In USB output status, hold the MODE button 2 seconds to connect or disconnect the power supply.
Input voltage: DC 12V/2A
Output voltage: 4.2V±0.05V / 1.42V /3.65±0.05V
Output current: 300 mA × 4 / 500 mA × 4 / 700 mA × 4 / 1000 mA × 4
Li-ion / IMR/LiFePO4: 26650, 22650,18650,17670,18490,17500,17335,16340(RCR123),14500
Ni-MH / Ni-Cd: AA,AAA,SC,C
For this charger may only be used with rechargeable battery types listed above. Do not attempt to charge other battery types, this is dangerous and may cause personal injury!
Do not mix charge LiFePO4 battery with other battery types!
USB output: 5V 1A
USB output no-load voltage: 4.90V ~ 5.30V
Max output current:1000mA
Over-discharge protection voltage: 3.0V±0.1V
Note: USB output function only work at IMR or Li-ion batteries.
Weight: 203g (without battery and adapter)
Size: 160mm*93mm*36mm
Storage temperature: -20℃~ 60℃
Lights Buy/Sell/Trade / Re: Vital Gear Sales - APRIL 2015
« Last post by Lightknot on September 25, 2015, 02:19:26 PM »
Thread's not dead! Here we are in October 2015, with lot's of tasty Vital Gear and new products on the website. The link is in the signature line below. Feel free to post interest or check the site!
Lights Buy/Sell/Trade / NEW, SKILHUNT DS16 XP-L 500 lumens AA EDC flashlight
« Last post by skilhunt on August 19, 2015, 03:57:03 AM »
NEW, SKILHUNT DS16 XP-L 500 lumens AA EDC flashlight

Max output: 500 Lumens
Max runtime:100 hrs
Max Beam Distance: 126 meters
Waterproof: IPX-8
Impact resistant: 1.5 Meter
Battery: 1×14500 or 1x AA Ni-mh or Alkaline
Rated Range: 0.9V ~ 4.2V
Length 92mm/3.62inch
Head diameter 24mm/0.94inch
Body diameter 22mm/0.86inch
Weight: 51g / 1.8oz (without battery)
Accessories: Clip, lanyard, magnet replace O-ring, Operator’s manual, Warranty card, Spare O-ring
Optional Accessories: Headband
1. Super bright & lastest CREE XPL LED, High-performance, High-efficiency and energy conservation.
2. Durable aluminum vacuum plating reflector, Efficiency reflection, perfect beamshot, excellent structure and temperature resistance.
3. Toughened ultra-clear glass lens with 99% luminousness anti-reflective coating.
4. Rugged indestructible aluminum body with anti-scratching type III hard anodization.
5. Multi-level dissipating heat design, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity.
6. Side switch button to transferring mode user-friendly interface to adjust output.
7. Four output levels and strobe, suitable for different environment.
8. Wide input range provides more choices of batteries.
9. Automatic memory function, remember bast used setting and can be preset to specific output mode for instant access.
10. Reverse polarity protection, to protect from improper battery installation.
11. Low-voltage prompts function, the light will flash when the battery is low, remind user replace the battery on time.
12. Engineered anti-slip knurling for a tightly firm grip.
13. Dual recoil absorbing springs, battery impact resistance.
14. Tail stand as a candle-light.
15. Tail hand hole design for lanyard use, to prevent accidental dropping.
1. Battery installation & Replace magnet: Insert the battery into the flashlight,the battery positive pole toward the light head. Ensure batteries are inserted correctly,the flashlight will not operate with incorrectly inserted batteries. Ensure when the light turning on,the beam is directed away from the eyes.
When take the light with Bankcards(magnetic) or Cell phone,should replaced Magnet with O-ring.
2. Flashlight turning on/off: When the flashlight was OFF status:
Press the side switch to memorized brightness level.
Press and hold the side switch 0.5 second,to low mode.
Quickly double press side switch to turbo mode.
When the flashlight was ON(any mode) status:
Press and hold the side switch 0.5 second to turn off.
3. Brightness & mode selection: Brightness level:
Press side switch to Low-Mid-High-Turbo, cycle.
Special modes:
Quickly double press the side switch to Strobe (10Hz),Press side switch back to previous brightness level.
4. Low voltage indication
When the battery voltage drop down,the red indicator will blink twice every seconds.
Pages: 1 [2] 3 4 5 ... 10