Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - cmacclel

Pages: [1] 2
1
Mac's Customs / Seoul P7 Mag
« on: March 10, 2008, 02:12:20 AM »
-Lime Green Mag Host
-Seoul P7
-Custom Heatsink
-Glow Powder around Pedastal
-2-Stage resistored TailSwitch (150ma Low / 3.2 Amps High on a fresh cell)
-Powered by a Single 26mm x 70mm 2600mah Emoli cell
-Medium  Stipple Aluminum Reflector


















BeamShots from 15 feet

SureFire L2 High 100 Lumens



P7 Low 150ma



P7 High 3.2amps


2
Materials/Theories/Fabrication / Spy007
« on: February 18, 2008, 04:49:52 PM »
There only one word that comes to mind when I try to describe the new Spy007 and that's "Sexy" :) Dave well Done!






3
Talk Story / The Dynamic Duo!!!
« on: February 07, 2008, 04:45:32 AM »
Sorry I could not Help Myself!


4
Mac's Customs / 1000 Lumen Mag *Feeler*
« on: January 02, 2008, 04:40:47 AM »
I may make a few of these lights so if your interested please let me know.

Price will be around $275

-1.25 "D" Size host
-Switch Converted to Momentary
-Osram Ostar 1000 Lumen 15watt LED
-MaxFlex Driver Board (5 levels 350ma, 500ma, 750ma, 1000ma Current Tables)
-Huge Heasink (Osrams run hot)
-Fraen Reflector coupled with a Stippled Mag Reflector
-Tri-Bored for FiveMega's Premium battery holder with charging port. (3x17670)
-Custom recessed Tailcap Spring

Theoretic Runtimes using a 1600ma 17670 Cell

750ma Current Table (battery current draw)

Level 1 0.041ma Runtime 39 hours
Level 2 0.314ma Runtime 5 hours
Level 3 0.523ma Runtime 3 hours
Level 4 0.846ma Runtime 1.88 hours
Level 5 1.40 amps Runtime 1.13 hours

1000ma Current Table (battery current draw)

Level 1 0.045ma Runtime 35.5 hours
Level 2 0.463ma Runtime 3.45 hours
Level 3 0.770ma Runtime 2 hours
Level 4 1.27 amps Runtime 1.25 hours
Level 5 2.10 amps Runtime 45 minutes




Compared to a 3D


Compared to a 3D


Light Engine


MaxFlex


Light Engine Complete


Switch


Business End

5
Mac's Customs / Surefire 6p Rebelized
« on: December 26, 2007, 04:42:38 PM »
I took a few days to play with the new Luxeon Rebels. First let me say these are *really* no fun to play with :(

I still remember the day I received my first batch of the Cree XR-E's and was complaining up and down at how much more difficult they where to work with compared to the old Luxeon III's and V's. Let's just say these new Rebels have raised the bar for difficulty for flashlight modders.

Anyway here is light number 1.

-SureFire 6p Defender Host
-17670 Powered
-3x Luxeon Rebels 0100 Bin warm white tint
-3x Mcr10 Reflectors
-Each LED see's 350ma (Regulated)
-Single Level
-750ma Current Draw at the battery end should provide 2 hours runtime.






6
Mac's Customs / Mag Rebelized
« on: December 26, 2007, 04:42:09 PM »
I took a few days to play with the new Luxeon Rebels. First let me say these are *really* no fun to play with :(

I still remember the day I received my first batch of the Cree XR-E's and was complaining up and down at how much more difficult they where to work with compared to the old Luxeon III's and V's. Let's just say these new Rebels have raised the bar for difficulty for flashlight modders.

My Buddy Tom always said I should build a light with no head and I always said *NO WAY* that would be Butt Ugly :)

Anyway here is number 2.

-MagLite Tube Host
-3x 17670 Powered
-7x Luxeon Rebels 0100 Bin warm white tint
-7x Mcr10 Reflectors
-The Shoppe's Shark/Remora Boost Driver with 3 levels (90ma-350ma-700ma)
-Custom Heatsink
-TailSwitch








7
Mac's Customs / Tri-Ti
« on: December 09, 2007, 10:53:09 PM »
-1 Beautiful Tranquillity Base Host :)
-3x MCR17xr Reflectors
-3x Cree XR-E Q5 WC Emitters
-Flupic Driver (Each LED see's 400ma max)
-Custom Heatsink & Board Holder
-18500 Powered














8
Lights Buy/Sell/Trade / WTB Dragon
« on: December 08, 2007, 03:19:51 PM »
Anyone have one for sale or trade?

Mac


9
Mac's Customs / New Shop finally ready
« on: November 20, 2007, 05:06:38 AM »
Sorry for the Delays on my end for the past few weeks but since the cold weather moved into New England I needed to get my new shop up and running ASAP.

Here are a few pictures

Curtains keep the chips to one portion of the room. These where the cheap way out. I believe I will upgrade to a real curtain soon though there not cheap at $400.














10
Mac's Customs / "Sceptre"
« on: October 16, 2007, 01:39:48 AM »
I will be building 10 of these lights 3 of which are already spoken for.

*7x Cree Q5 Bin WC LED's
*7x Mcr17XR Reflectors
*Custom Anodized Heatsink
*2-Stage resistored tailswitch
*UCL Lens
*Premium FiveMega battery holder for 6xR123 cells

Light is setup to draw 150ma on low. Estimated output is approximately 350 lumens with over 4 hours runtime

On high the light draws 650ma for and estimated output of over 1100 lumens and over an hour runtime.

I know of no other light that offers the brightness of this light at 2x its size.

Price is $499 plus shipping.















11
Mac's Customs / Tri-Cree "Q" Bin Tri-Flupic Fade Host
« on: October 09, 2007, 03:09:45 AM »
-Nascar Fade Host
-Tri-Flupic Driver board 2.8 amp Max
-UCL Lens
-3x Cree Q2 XR-E warm tint
-3x MCR20 Reflectors (modified for XR-E)
-Uses AW's new "C" size Li-Ion 3300mah cell
-Custom driver board holder
-Modamag's Copper Heatsink



Did I mention it was small?











12
Mac's Customs / SuperFlashlight III "Flood Monster"
« on: September 28, 2007, 03:36:12 AM »
-Custom Heatsink
-3X "Q" bin Cree XR-E LED's
-Flupic Driver Each LED see's 450mah for approximatley 300+ lumens
-Bored for 18650 Cell
-UCL Lens

Next to it is a new Surefire I threw together with Q-Bins also :)







13
Mac's Customs / Shorty Seoul Mag Part II
« on: September 19, 2007, 06:31:33 PM »
-P4 "U" Bin Warm white Seoul LED's
-UCL Lens
-H22's Heatsink
-Flupic Powered for 1.2A in Burst mode along with Low-High-Strobe-Beacon
-Glow Powdered pedastal
-Tailswitch
-Powered by AW's new "C" Li-Ion Cell

Fully Knurled Version $175 Delivered



Mac







14
Mac's Customs / Blue 10w Mag HID *Now with Crenulated Bezel* *Sold*
« on: September 19, 2007, 02:15:41 AM »
-10watt Solarc system (overdriven to approx. 13watts)
-FiveMega Premium 3x17670 series Battery Holder
-Fluted Head
-Smooth Aluminum reflector
-UCL Lens
-Glass envelope on bulb removed

$306 Delivered (US)






15
Lights Buy/Sell/Trade / Many Lights for Sale (Updated 5/26 12pm)
« on: May 22, 2007, 06:34:37 PM »
1) WiseLED Tactical 1000 lumen 7x K2 light. These list for $599 at Wiseled.com. $400 Delivered.

Info on the light can be found here

http://www.wiseled.com/index.aspx?articleid=+927+927

Next to a Surefire M6



Many pics and beamshots can be found here

http://public.fotki.com/cmacclel/lights-1/wiseled-tactical/

2) Custom Duracoated Host with 3 amp tailswitch. This is an empty Host with tailswitch only. Body length is around 6" $150 Delivered





3) Full Custom Host approx 1D aize with 3 amp tailswitch. This has a one of a kind bezel and tail. Many Many hours went into machining this host. Delivered *SOLD*







4) Brand new FM11 Hotwire (complete minus battery's) $230 Delivered

5) Brand new FM85 Hotwire (complete minus battery's) $240 Delivered

6) X990 HID, light itself is in good shape but battery(1) will not hold a charge while stored $175 shipped.

7)HD45 reflector *SOLD*

8.) All Black including bezel P4 Seoul Powered Mag

-UCL Lens
-P4 Seoul
-Uses AW's new "C" Cell
-Powered by Mike Jordans Awesome board with 3 brightness levels with 1 amp on high and other features such as strobe, heartbeat, wave, and more
-Modified Mag reflector
-PVC Machined spacer
-3amp Tail switch
-Glow powder around emitter

$200 Delivered (US)





9) Custom "C" Size Light

-UCL Lens
-3x Q2 Cree XR-E Stars
-Modamags Tailcap switch
-Modamags PTS heatsink
-Modified MCR20 reflectors
-Custom 2-Stage resistored setup, (Turn head to adjust) Low = 400ma to each emitter High = 800ma to each emitter.

 *SOLD*







10)  Custom "C" Size Light

-UCL Lens
-3x Q2 Cree XR-E Emitters
-Modamags Tailcap switch
-Modamags new COPPER heatsink
-MCR19XR relfectors with custom centering rings
-Light is direct drive setup and each emmitter see's 1amp.

$425







11) Jil DD Light with U Bin and Flupic driver. Light has been carried so it has a few marks. $80 shipped







More will be added soon.

Only reason for selling these lights is funding for repairs of a new house purchase :(


Thanks Mac

Pages: [1] 2