Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - skilhunt

Pages: [1] 2
2
















S2 pro HI / HD USB rechargeable tactical LED flashlight
 
LED: CREE XP-L HD or HI
Max output: 1250 Lumens / 1100 Lumens
Max runtime: More than 1 month
Max beam distance: 306 meters / 371 meters
Waterproof: IPX-8
Impact resistant: 1 Meter
Battery: 1×18650, 2xCR123A, 2xRCR123A/16340
Rated Range: 2.8V ~ 8.4V
We recommend to use a 18650 lithium battery with excellent discharge performance.
 
Dimension:
Length 143.7mm/5.66inch
Head diameter 36.0mm/1.41inch
Body diameter 25.4mm/1.0inch
Weight: 125g /4.4oz(exclude battery)
Accessories: Operator’s manual, Spare O-rings, Spare Tailcap Rubber Boot, USB cable, clip, lanyard
 
Operation
Note for battery installation: Make sure that insert the battery with the positive end toward the head.  Otherwise the torch will not turn on properly.
Please do not point the flashlight to the eyes of people or animals, that may affect vision.
Flashlight turning on/off, Brightness and Modes switching (Simple tactical mode and Extended multi-mode):
– Gently press(no click) the tail switch to momentary light; Full press (clip) the tail switch then locked to turn on or turn off the flashlight.
When the tail switch is locked on, hold press side button 0.5 seconds to turn off, And then hold press side switch 3 seconds to switching to simple tactical mode or extended multi-mode.
----------------------------------------------------------------------------------------------------------------------------
– Simple tactical mode (the main light flashes 3 times when switching to this mode):
   When the tail switch is locked on:
    Click the side button to change brightness : Low L1 – Medium M1 – High H1 – Turbo T1,  Cycle;
    Quickly double-click the side button directly into the S1 Strobe, click back to last used brightness;
  Hold press the side button 0.5 seconds into turn off state:
     Click side button to Turbo T1 brightness; Quickly double-click to S1 Strobe; Hold press side button 0.5 seconds to Low L1 brightness;
   When Full press tail switch turn off:
   Full Press tail switch again turn on to memory last used setting.
-----------------------------------------------------------------------------------------------------------------------------
《《《《《《《—————-Hold Press side button 3 seconds to switching ——————–》》》》》》
-----------------------------------------------------------------------------------------------------------------------------
– Extended multi-mode (the main light flashes 1 time when switching to this mode):
When the tail switch is locked on:
Click the side button to change brightness : Low L1 – Medium M1 – High H1 – Turbo T1,  Cycle;
Quickly double-click the side button to switch Sub-level(i.e between L1 & L2), turn off memorized the last used brightness.
When flashlight in brightness mode, quickly triple press the side button to Strobe (S1), then double-click to switch S1/S2/S3 mode, Press side button back to previous brightness Or turn off memorized the previous brightness.
Hold press the side button 0.5 seconds into turn off state:
Click side button to last used brightness; Quickly double-click to Turbo brightness; Hold press side button 0.5 seconds to Low brightness; Quickly triple press the side button to Strobe mode.
When Full press tail switch turn off:
Full Press tail switch again turn on to memory last used setting.
-----------------------------------------------------------------------------------------------------------------------------
Power indicator: Every time press the tail switch turn on , the side indicator(blue or red light) will be light 5 seconds to display the battery power.
Constant Blue : battery power in more than 80%;
Flashing Blue : battery power in more than 50%;
Constant Red : battery power in more than 20%;
Flashing Red : battery power below 20%, the power is about to run out.
Low-voltage indicator:
When battery voltage is less than 3.3V, the low-voltage indicator flash twice every ten seconds; when the voltage drops to 3V, the low-voltage indicator flash three times every few seconds, prompts to replace the battery as soon as possible;
When the voltage below 2.8V, the flashlight may not work (flashing or shutting down).
 
charging instructions and notices:
Please turn on the flashlight tail switch before charging, the main lights will automatically turn off when charging.
In charging, the red indicator constant light on, when battery almost full charge, indicator change to constant blue light, please charge more half hour to make sure battery full charge.
When the red indicator flash, please check battery installed correct or not, flashlight contacts good or not.
When the flashlight is connected to the power supply or power bank via the MICRO USB cable, the flashlight will still work (except for Turbo mode).
 
Tips: Rechargeable function only for the nominal voltage of 3.6V / 3.7V 18650 rechargeable lithium battery!
 
Features
1 .Super bright & lastest CREE XP-L LED, High-Performance, High-Efficiency and energy conservation.
2 .Durable aluminum vacuum plating reflector, Efficiency reflection, perfect beamshot,excellent structure and temperature resistance.
3 .New glass lens with full-wave band AR coating, Completely loss-less brightness.
4 .Rugged indestructible aluminum body with anti-scratching type III hard anodization
5 .Multi-level dissipating heat design, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity.
Flashlight with built-in Micro USB charging design, better compatibility, charging more convenient.
7 . Dual-mode design, simple tactical mode and extended multi-mode, to meet the difference use of environment.
8 .Eight brightness and three flashing modes to choose from pre-set to meet the different needs of the use.
9 .Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode.
10 .Automatic memory function, remember last used setting and can be preset to specific output mode for instant access.
11 .Reverse polarity protection, to protect from improper battery installation.
12 .Both timing decrease output and temperature control output, double protection, avoid the high temperature damage
13 .Circuit has two low-voltage indications function, to remind the user to replace the battery in time.
14 .Flashlight with battery power indicator function, every turn on can indicate the battery power, easy control the use time at any time.
15 .Engineered anti-slip knurling for a tightly firm
16. Dual recoil absoring springs, better impact resistance.
17. Tail stand as a candle-light.
 
Note: The above parameters are only approximation, with one 18650 capacity of 3500mAh high-quality lithium battery in the laboratory environment testing. The product performance may change since battery different or the different use of environment.

http://www.skilhunt.com/product-detail/s2-pro-usb-rechargeable-tactical-flashlight/

3
















S3 pro HI / HD USB rechargeable tactical LED flashlight
LED: CREE XHP35  HD / HI
Max output: 1600 Lumen / 1400 Lumen
Max runtime: More than 1 month
Max beam distance: 306 meters / 371 meters
Waterproof: IPX-8
Impact resistant: 1 Meter
Battery: 1×18650
Rated Range: 2.8V ~ 8.4V
We recommend to use a 18650 lithium battery with excellent discharge performance.
 
Dimension:
Length 143.7mm/5.66inch
Head diameter 36.0mm/1.41inch
Body diameter 25.4mm/1.0inch
Weight: 125g /4.4oz(exclude battery)
Accessories: Operator’s manual, Spare O-rings, Spare Tailcap Rubber Boot, USB cable, clip, lanyard
 
Operation
Note for battery installation: Make sure that insert the battery with the positive end toward the head.  Otherwise the torch will not turn on properly.
Please do not point the flashlight to the eyes of people or animals, that may affect vision.
Flashlight turning on/off, Brightness and Modes switching (Simple tactical mode and Extended multi-mode):
– Gently press(no click) the tail switch to momentary light; Full press (clip) the tail switch then locked to turn on or turn off the flashlight.
When the tail switch is locked on, hold press side button 0.5 seconds to turn off, And then hold press side switch 3 seconds to switching to simple tactical mode or extended multi-mode.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
– Simple tactical mode (the main light flashes 3 times when switching to this mode):
   When the tail switch is locked on:
    Click the side button to change brightness : Low L1 – Medium M1 – High H1 – Turbo T1,  Cycle;
    Quickly double-click the side button directly into the S1 Strobe, click back to last used brightness;
 
  Hold press the side button 0.5 seconds into turn off state:
     Click side button to Turbo T1 brightness; Quickly double-click to S1 Strobe; Hold press side button 0.5 seconds to Low L1 brightness;
   When Full press tail switch turn off:
   Full Press tail switch again turn on to memory last used setting.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
《《《《《《《—————-Hold Press side button 3 seconds to switching ——————–》》》》》》
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
– Extended multi-mode (the main light flashes 1 time when switching to this mode):
When the tail switch is locked on:
Click the side button to change brightness : Low L1 – Medium M1 – High H1 – Turbo T1,  Cycle;
Quickly double-click the side button to switch Sub-level(i.e between L1 & L2), turn off memorized the last used brightness.
When flashlight in brightness mode, quickly triple press the side button to Strobe (S1), then double-click to switch S1/S2/S3 mode, Press side button back to previous brightness Or turn off memorized the previous brightness.
 
Hold press the side button 0.5 seconds into turn off state:
Click side button to last used brightness; Quickly double-click to Turbo brightness; Hold press side button 0.5 seconds to Low brightness; Quickly triple press the side button to Strobe mode.
When Full press tail switch turn off:
Full Press tail switch again turn on to memory last used setting.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Power indicator: Every time press the tail switchturn on , the side indicator(blue or red light) will be light 5 seconds to display the battery power.
Constant Blue : battery power in more than 80%;
Flashing Blue : battery power in more than 50%;
Constant Red : battery power in more than 20%;
Flashing Red : battery power below 20%, the power is about to run out.

Low-voltage indicator:
When battery voltage is less than 3.3V, the low-voltage indicator flash twice every ten seconds; when the voltage drops to 3V, the low-voltage indicator flash three times every few seconds, prompts to replace the battery as soon as possible;
When the voltage below 2.8V, the flashlight may not work (flashing or shutting down).
 
charging instructions and notices:
Please turn on the flashlight tail switch before charging, the main lights will automatically turn off when charging.
In charging, the red indicator constant light on, when battery almost full charge, indicator change to constant blue light, please charge more half hour to make sure battery full charge.
When the red indicator flash, please check battery installed correct or not, flashlight contacts good or not.
When the flashlight is connected to the power supply or power bank via the MICRO USB cable, the flashlight will still work (except for Turbo mode).
 
Tips: Rechargeable function only for the nominal voltage of 3.6V / 3.7V 18650 rechargeable lithium battery!
 
Features
1 .Super bright & lastest CREE XHP35 LED, High-Performance, High-Efficiency and energy conservation.
2 .Durable aluminum vacuum plating reflector, Efficiency reflection, perfect beamshot,excellent structure and temperature resistance.
3 .New glass lens with full-wave band AR coating, Completely loss-less brightness.
4 .Rugged indestructible aluminum body with anti-scratching type III hard anodization
5 .Multi-level dissipating heat design, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity.
Flashlight with built-in Micro USB charging design, better compatibility, charging more convenient.
7 . Dual-mode design, simple tactical mode and extended multi-mode, to meet the difference use of environment.
8 .Eight brightness and three flashing modes to choose from pre-set to meet the different needs of the use.
9 .Wide input range provides more choices of batteries. High efficiency driver circuit, no visible flash in any mode.
10 .Automatic memory function, remember last used setting and can be preset to specific output mode for instant access.
11 .Reverse polarity protection, to protect from improper battery installation.
12 .Both timing decrease output and temperature control output, double protection, avoid the high temperaturedamage
13 .Circuit has two low-voltage indication function, to remind the user to replace the battery in time.
14 .Flashlight with battery power indicator function, every turn on will indicate the battery power, easy control the use time at any time.
15 .Engineered anti-slip knurling for a tightly firm
16. Dual recoil absoring springs, better impact resistance.
17. Tail stand as a candle-light.
 
Note: The above parameters are only approximation, with one 18650 capacity of 3500mAh high-quality lithium battery in the laboratory environment testing. The product performance may change since battery different or the different use of environment.

http://www.skilhunt.com/product-detail/s3-pro-usb-rechargeable-tactical-flashlight/

4
Lights Buy/Sell/Trade / DS21 HI CREE XP-L High-Intensity LED Flashlight
« on: January 07, 2016, 11:55:05 AM »
DS21 New brother coming — DS21 HI tiny super thrower EDC led flashlight.

 
Tiny Super Thrower Flashlight
LED: CREE XP-L HI (High-Intensity)
Max output: 800 Lumens
Max runtime:120 hrs
Beam Distance: 219 meters
More details http://www.skilhunt.com/product-detail/ds21-hi-flashlight/

5
Lights Buy/Sell/Trade / New release! H15 450 Lumens AA TIR LED headlamp
« on: November 19, 2015, 10:27:50 AM »
The H15 LED headlamp is a powerful with 450 ANSI Lumens and compact lightweight design flashlight/headlamp that running on one AA battery.



-Super bright & latest CREE XML-2 U3 LED
-Flat tail cap with strong magnet to secure to ferrous surfaces
-Side switch for simple and convenient operation
-4 brightness level,strobe mode,beacon mode

More details http://www.skilhunt.com/product-detail/h15-led-headlamp/

6
Lights Buy/Sell/Trade / New M4D intelliget LCD digicharger release
« on: November 04, 2015, 08:38:58 AM »















http://www.skilhunt.com/product-detail/m4d-lcd-digicharger/
M4D LCD Digicharger:
Features:
High compatibility, compatible with Li-ion, LiFePO4, IMR, Ni-MH and Ni-Cd batteries.
Can charge 4pcs batteries all with 1000mA charging current at the same time, fast charge to save your time.
One button easy control all charging status.
Four battery channels independent control.
Soft-start function, to avoid damage from large current charge and safely charge small capacity batteries.
Four charging current options for all channels. ( 300mA, 500mA, 700mA and 1000mA )
LCD display to you each of batteries charging status include charging current, charging capacity,
charging time, charging voltage. Free control the charging process at any time.
Reverse polarity protection,to protect from improper battery installation.
Short-circuit, over-load and over-heat protected, intelligent circuits.
Three-stage charge (CC, CV and Trickle Charge).
Use new fire-retardant flame-resistant material for safety.
0V activation function can wake up the over-discharged sleeping batteries
USB output function, can be portable power source for your mobile devices.
Introduction:
The M4D digicharger is an universal, intelligent LCD charger compatible with almost all
types of rechargeable batteries thus eliminating the need to own several chargers. The
M4D is a real fast charger that can charge 4pcs batteries all with 1000mA charging current at the same time.
The M4D is able to automatically identify Li-ion, IMR, Ni-MH and Ni-Cd rechargeable batteries and apply an appropriate charging mode
( Constant Charge Current (CC), Constant Charge Voltage (CV) and Trickle Charge).
The M4D’s LCD display to you each of batteries charging status include charging current, charging time, charging voltage, charging capacity. The user can also manually choose the current by the switch button.
Operations:
The charger default to charge Li-ion/ IMR or Ni-MH / Ni-Cd. Hold the MODE button 5 seconds switch to LiFePO4 charging mode and LCD display as “LiFePO4”. Hold the MODE button 5 seconds switch back to the original charging mode.
The charger default charging current at 300mA. Hold the MODE button 2 seconds to switch charging current at 300mA/500mA/700mA /1000mA. After selection 8 seconds, the charger start to charge.
Press the MODE button, switch to display battery charging time or charging capacity.
In USB output status, hold the MODE button 2 seconds to connect or disconnect the power supply.
Specifications:
Input voltage: DC 12V/2A
Output voltage: 4.2V±0.05V / 1.42V /3.65±0.05V
Output current: 300 mA × 4 / 500 mA × 4 / 700 mA × 4 / 1000 mA × 4
Li-ion / IMR/LiFePO4: 26650, 22650,18650,17670,18490,17500,17335,16340(RCR123),14500
Ni-MH / Ni-Cd: AA,AAA,SC,C
Caution:
For this charger may only be used with rechargeable battery types listed above. Do not attempt to charge other battery types, this is dangerous and may cause personal injury!
Do not mix charge LiFePO4 battery with other battery types!
USB output: 5V 1A
USB output no-load voltage: 4.90V ~ 5.30V
Max output current:1000mA
Over-discharge protection voltage: 3.0V±0.1V
Note: USB output function only work at IMR or Li-ion batteries.
Weight: 203g (without battery and adapter)
Size: 160mm*93mm*36mm
Storage temperature: -20℃~ 60℃

7
NEW, SKILHUNT DS16 XP-L 500 lumens AA EDC flashlight






LED: CREE XPL
Max output: 500 Lumens
Max runtime:100 hrs
Max Beam Distance: 126 meters
Waterproof: IPX-8
Impact resistant: 1.5 Meter
Battery: 1×14500 or 1x AA Ni-mh or Alkaline
Rated Range: 0.9V ~ 4.2V
Dimension:
Length 92mm/3.62inch
Head diameter 24mm/0.94inch
Body diameter 22mm/0.86inch
Weight: 51g / 1.8oz (without battery)
Accessories: Clip, lanyard, magnet replace O-ring, Operator’s manual, Warranty card, Spare O-ring
Optional Accessories: Headband
Features
1. Super bright & lastest CREE XPL LED, High-performance, High-efficiency and energy conservation.
2. Durable aluminum vacuum plating reflector, Efficiency reflection, perfect beamshot, excellent structure and temperature resistance.
3. Toughened ultra-clear glass lens with 99% luminousness anti-reflective coating.
4. Rugged indestructible aluminum body with anti-scratching type III hard anodization.
5. Multi-level dissipating heat design, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity.
6. Side switch button to transferring mode user-friendly interface to adjust output.
7. Four output levels and strobe, suitable for different environment.
8. Wide input range provides more choices of batteries.
9. Automatic memory function, remember bast used setting and can be preset to specific output mode for instant access.
10. Reverse polarity protection, to protect from improper battery installation.
11. Low-voltage prompts function, the light will flash when the battery is low, remind user replace the battery on time.
12. Engineered anti-slip knurling for a tightly firm grip.
13. Dual recoil absorbing springs, battery impact resistance.
14. Tail stand as a candle-light.
15. Tail hand hole design for lanyard use, to prevent accidental dropping.
Operation
1. Battery installation & Replace magnet: Insert the battery into the flashlight,the battery positive pole toward the light head. Ensure batteries are inserted correctly,the flashlight will not operate with incorrectly inserted batteries. Ensure when the light turning on,the beam is directed away from the eyes.
When take the light with Bankcards(magnetic) or Cell phone,should replaced Magnet with O-ring.
2. Flashlight turning on/off: When the flashlight was OFF status:
Press the side switch to memorized brightness level.
Press and hold the side switch 0.5 second,to low mode.
Quickly double press side switch to turbo mode.
When the flashlight was ON(any mode) status:
Press and hold the side switch 0.5 second to turn off.
3. Brightness & mode selection: Brightness level:
Press side switch to Low-Mid-High-Turbo, cycle.
Special modes:
Quickly double press the side switch to Strobe (10Hz),Press side switch back to previous brightness level.
4. Low voltage indication
When the battery voltage drop down,the red indicator will blink twice every seconds.

http://www.skilhunt.com/product-detail/ds16-flashlight/

8
NEW launched! SKILHUNT DS21 XP-L 1000 lumens 18650 EDC flashlight





Specifications (ANSI/NEMA FL1-2009 Standards):   

LED: CREE XP-L

Output:   Mode 1   Mode 2   Mode 3   Mode 4
900 Lumens   340 Lumens   130 Lumens   9 Lumens
Runtime   2.5 h   5.5 h   16 h   120 h

Beam Distance:173 Meters
Peak Beam Intensity:7500 cd
Water Resistance   IPX-8
Impact Resistance:1.5 Meter
Battery: 1×18650 or 2x CR123A,2x RCR123
Rated Range: 3V ~ 9V
Dimension:
Length 110mm/4.33inch
Head diameter 24mm/0.94inch
Body diameter 22.8mm/0.9inch
Weight: 52g(without battery)
Accessories: Clip, lanyard, magnet replace O-ring, Operator’s manual, Warranty card, Spare O-ring
Optional Accessories: Headband,Battery,Battery Charger
Features
1. Super bright & lastest CREE XPL LED, High-performance, High-efficiency and energy conservation.
2. Durable aluminum vacuum plating reflector, Efficiency reflection, perfect beamshot, excellent structure
and temperature resistance.
3. Toughened ultra-clear glass lens with 99% luminousness anti-reflective coating.
4. Rugged indestructible aluminum body with anti-scratching type III hard anodization.
5. Multi-level dissipating heat design, excellent heat dissipation. Flashlight head integrated construction, high
thermal conductivity.
6. Side switch button to transferring mode user-friendly interface to adjust output.
7. Four output levels and strobe, suitable for different environment.
8. Wide input range provides more choices of batteries.
9. Automatic memory function, remember bast used setting and can be preset to specific output mode
for instant access.
10. Reverse polarity protection, to protect from improper battery installation.
11. Low-voltage prompts function, the light will flash when the battery is low, remind user replace the battery
on time.
12. Engineered anti-slip knurling for a tightly firm grip.
13. Dual recoil absorbing springs, battery impact resistance.
14. Tail stand as a candle-light.
15. Tail hand hole design for lanyard use, to prevent accidental dropping.

http://www.skilhunt.com/product-detail/ds21-flashlight/

9
Great to share to everyone,

SKILHUNT new H02C colorful light is coming soon.

CREE XM-L color LED
Brightness:
- White light: Low - Medium - High and SOS - Beacon
- Red light: High - Low
- Green light: High - Low
- Blue light: High - Low

Weight: 58g (excluded battery and headband)
Waterproof to IPX8
Type III anodized finished

 

10
Hello guys,

New, SKILHUNT H02R(reflector version) 860 lumens headlamp
http://skilhunt.com/products.php?xing=,0,15,%&ting=3




H02R (reflector version)

LED: CREE XM-L2
Max output: ANSI 860 Lumens
Max runtime: 120 hours
Max beam distance: 123 meters
Max peak beam intensity: 3800cd
Waterproof: IPX-8
Impact resistant: 1.5 Meter
Battery: 1x18650 or 2x CR123A
Rated Range: 3V ~ 9V

Dimension:
Length 110mm / 4.33 inch
Head diameter 25mm / 0.98 inch
Body diameter 22.8mm/0.9inch

Weight: 58g / 2.05oz (without battery)
Accessories: Headband (Detachable straps with silicone holder ) , clip, lanyard, magnet replace O-ring, Operator’s manual, Warranty card, Spare O-ring

11
Lights Buy/Sell/Trade / NEW, SKILHUNT H02 820 lumens headlamp
« on: May 04, 2014, 10:32:15 AM »
Latest release! SKILHUNT H02 820 lumens headlamp.













H02 headlamp

LED: CREE XM-L2
Max output: ANSI 820 Lumens / 960 LED Lumens
Max runtime: 120 hours
Max beam distance: 105 meters
Max peak beam intensity: 2800cd
Waterproof: IPX-8
Impact resistant: 1.5 Meter
Battery: 1x18650 or 2x CR123A
Rated Range: 3V ~ 6V

Dimension:
Length 109mm/4.29inch
Head diameter 24mm/0.94inch
Body diameter 22.8mm/0.9inch


Weight: 63g (without battery)
Accessories: Headband (Detachable straps with silicone holder ) , clip, lanyard, magnet replace O-ring, Operator’s manual, Warranty card, Spare O-ring

Features
1. Super bright & lastest CREE XM-L2 LED, High-performance, High-efficiency and energy conservation.
2. 960 LED lumens of light. Extremely bright headlamp powered by one 18650 Li-Ion battery.
3. Bead surface lens, wide and uniform flood beamshot. Max beam distance 105 meters.
4. Detachable straps with silicone holder, multiple, adjustable flashlight positioning loops.
5. Flat tail cap with strong magnet to secure to ferrous surfaces.
6. Rugged indestructible aluminum body with anti-scratching type III hard anodization.
7. Multi-level dissipating heat design, excellent heat dissipation.
8. Side switch button to transferring mode user-friendly interface to adjust output.
9. Four output levels and strobe, suitable for different environment.
10. Wide input range provides more choices of batteries.
11. Automatic memory function, remember bast used setting and can be preset to specific output mode for instant access.
12. Reverse polarity protection, to protect from improper battery installation.
13. Low-voltage prompts function, the light will flash when the battery is low, remind user replace the battery on time.
14. Engineered anti-slip knurling for a tightly firm grip.
15. Dual recoil absorbing springs, battery impact resistance.
16. Tail stand as a candle-light.
17. Tail hand hole design for lanyard use, to prevent accidental dropping.

12
Hello Everyone,

New release, SKILHUNT DS20 EDC 480lumens flashlight

More details


















LED: CREE XM-L2
Max output:  480 Lumens
Max runtime: 240 h
Max beam distance: 123 m
Max peak beam intensity: 3800 cd
Waterproof: IPX-8
Impact resistant: 1.5 Meter
Battery: 1x18650 , 2x CR123A or 2x 16340
Rated Range: 3V ~ 9V
Dimension:
Length 110 mm/4.33 inch
Head diameter 24 mm/0.94 inch
Body diameter 22 mm/0.86 inch
 Weight: 55 g / 1.9 oz (without battery)
Accessories: Clip, lanyard, magnet replace O-ring, Operator’s manual, Warranty card, Spare O-ring
Optional Accessories: Headband, Battery,Charger
Features
1.       Super bright & lastest CREE XM-L2 LED, High-performance, High-efficiency and energy conservation.
2.       Durable aluminum vacuum plating reflector, Efficiency reflection, perfect beamshot, excellent structure and temperature resistance.
3.       Toughened ultra-clear glass lens with 99% luminousness anti-reflective coating.
4.       Rugged indestructible aluminum body with anti-scratching type III hard anodization.
5.       Multi-level dissipating heat design, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity.
6.       Side switch button to transferring mode user-friendly interface to adjust output.
7.       Four output levels and strobe, suitable for different environment.
8.       Wide input range provides more choices of batteries.
9.       Automatic memory function, remember bast used setting and can be preset to specific output mode for instant access.
10.   Reverse polarity protection, to protect from improper battery installation.
11.   Low-voltage prompts function, the light will flash when the battery is low, remind user replace the battery on time.
12.   Engineered anti-slip knurling for a tightly firm grip.
13.   Dual recoil absorbing springs, battery impact resistance.
14.   Tail stand as a candle-light.
15.   Tail hand hole design for lanyard use, to prevent accidental dropping.

13
Hello Everyone,

New release, SKILHUNT DS15 EDC 240lumens flashlight

More details


















LED: CREE XM-L2
Max output:  240Lumens
Max runtime: 120 h
Max beam distance: 85 m
Max peak beam intensity: 1800 cd
Waterproof: IPX-8
Impact resistant: 1.5 Meter
Battery: 1x14500 or 1x AA Ni-mh or Alkaline
Rated Range: 0.9V ~ 4.2V
Dimension:
Length 91mm/3.58inch
Head diameter 24mm/0.94inch
Body diameter 22mm/0.86inch
 Weight: 51g / 1.8oz (without battery)
Accessories: Clip, lanyard, magnet replace O-ring, Operator’s manual, Warranty card, Spare O-ring
Optional Accessories: Headband
Features
1.       Super bright & lastest CREE XM-L2 LED, High-performance, High-efficiency and energy conservation.
2.       Durable aluminum vacuum plating reflector, Efficiency reflection, perfect beamshot, excellent structure and temperature resistance.
3.       Toughened ultra-clear glass lens with 99% luminousness anti-reflective coating.
4.       Rugged indestructible aluminum body with anti-scratching type III hard anodization.
5.       Multi-level dissipating heat design, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity.
6.       Side switch button to transferring mode user-friendly interface to adjust output.
7.       Four output levels and strobe, suitable for different environment.
8.       Wide input range provides more choices of batteries.
9.       Automatic memory function, remember bast used setting and can be preset to specific output mode for instant access.
10.   Reverse polarity protection, to protect from improper battery installation.
11.   Low-voltage prompts function, the light will flash when the battery is low, remind user replace the battery on time.
12.   Engineered anti-slip knurling for a tightly firm grip.
13.   Dual recoil absorbing springs, battery impact resistance.
14.   Tail stand as a candle-light.
15.   Tail hand hole design for lanyard use, to prevent accidental dropping.

14
Hello Everyone,

New release, SKILHUNT DS10 EDC 300lumens flashlight

http://skilhunt.com/Product/Product.aspx?ID=159a97cc-6240-46b0-9d3e-6fe5d940a9ed


















DS10
LED: CREE XM-L2
Max output:  300Lumens
Max runtime:140hours
Max beam distance:98m
Max peak beam intensity:2400cd
Waterproof: IPX-8
Impact resistant: 1.5 Meter
Battery: 1x16340 or 1x CR123A
Rated Range: 2V ~ 4.2V

 Dimension:
Length 75mm/2.95inch
Head diameter 24mm/0.94inch
Body diameter 22mm/0.86inch

 Weight: 47g / 1.65oz (without battery)

Accessories: Clip, lanyard, magnet replace O-ring, Operator’s manual, Warranty card, Spare O-ring

Optional Accessories: Headband

Features
1.       Super bright & lastest CREE XM-L2 LED, High-performance, High-efficiency and energy conservation.
2.       Durable aluminum vacuum plating reflector, Efficiency reflection, perfect beamshot, excellent structure and temperature resistance.
3.       Toughened ultra-clear glass lens with 99% luminousness anti-reflective coating.
4.       Rugged indestructible aluminum body with anti-scratching type III hard anodization.
5.       Multi-level dissipating heat design, excellent heat dissipation. Flashlight head integrated construction, high thermal conductivity.
6.       Side switch button to transferring mode user-friendly interface to adjust output.
7.       Four output levels and strobe, suitable for different environment.
8.       Wide input range provides more choices of batteries.
9.       Automatic memory function, remember bast used setting and can be preset to specific output mode for instant access.
10.   Reverse polarity protection, to protect from improper battery installation.
11.   Low-voltage prompts function, the light will flash when the battery is low, remind user replace the battery on time.
12.   Engineered anti-slip knurling for a tightly firm grip.
13.   Dual recoil absorbing springs, battery impact resistance.
14.   Tail stand as a candle-light.
15.   Tail hand hole design for lanyard use, to prevent accidental dropping.

15
SKILHUNT new release!
K26 rechargeable 26650(battery included) flashlight, Max 1000 Lumens, XML-2, Max 360 Meters.
http://skilhunt.com/Product/Product....1-eb25383dbf64








www.skilhunt.com
service@skilhunt.com

Pages: [1] 2