Flashlight Forums

Modders, Custom Light Producers and Manufacturers => Mr. Bulk => Topic started by: MR Bulk on November 12, 2008, 02:31:46 PM

Title: DIY LionCub (AND OTHER) "Kits" - SOLD OUT!
Post by: MR Bulk on November 12, 2008, 02:31:46 PM

UPDATE 03-22-09:  SOLD OUT!  THANK YOU FOR THE GREAT  RESPONSE!



UPDATE 11-14-08:

Some pics for now, will get to updating the list once people commit (via Paypal) since there will be prices announced at the end of this post -


LionCub bods:
(http://i210.photobucket.com/albums/bb173/mrbulk/DSC01535.jpg)


Up Close - only ONE original knurled body (shown on bottom of pic) is available at higher cost (GONE), the other twenty will be as shown at top of pic:
(http://i210.photobucket.com/albums/bb173/mrbulk/DSC01530.jpg)


Lo and Behold, we got DragonHeart bods too -- notice that in the top row, the two on the right and on the bottom row the fourth on the right (GONE) are *SHINY*.  That is how they usually came, but the rest shown here have a matte-finished anodizing.  The three *SHINY* ones have NO TRIT SLOTS and will cost a little more, although I would think the matte ones are desirable as well simply for their "tactical-ness" for lack of a better word:
(http://i210.photobucket.com/albums/bb173/mrbulk/DSC01534.jpg)

Also note the top row lights are OD Green and the bottom row is Black except for the one on the far right which is a seventh OD Green.


Holy Cow, we still had STAINLESS DRAGONHEARTS???  These are COMPLETELY BUILT LIGHTS, and they simply turned up while going through my stuff:
(http://i210.photobucket.com/albums/bb173/mrbulk/DSC01536.jpg)

These four remaining Stainless Steel Dragons are (PRICE EDIT) $260 each plus shipping.

Now as for the selling price of the LionCub Kits, let's consider the componentry cost for each LionCub:

1) I paid $25 per circuit board

2) I paid $20 per McR-20 reflector

3) I paid as high as $14 for each Luxeon star as I always sought out and purchased the best bins available at the time

4) although I bought the dual-side AR-coated UCL lenses in *Bulk* (cool word, eh?), they retail for $7 from Flashlight Lens

5) the goldplated piano wire battery springs retail for $5

6) add another $5 for the o-rings and button covers and the total so far is

$25+$20+$14+$7+$5+$5 = $77 not yet counting the bodies

I am setting the price of each complete LionCub kit at only $99 (and I ASSURE you the bodies alone cost significantly more than $22 each!!!), and due to the losses at such a price I will require $5 to cover handling/packaging/shipping (in the U.S., contact me for international destinations as it will be more) plus $3 to cover Paypal fees so for simplicity's sake can we please just keep it to an even $107 delivered per each Cub kit regardless of number ordered, meaning two kits will be $214, etc.

SUCH a deal, I tell ya.

-GONE-Add $25 if you want the one Cub kit with the last available original LionCub body with the knurling and the lanyard hole in the tail.  But be warned, the bezel opening is still the original width (meaning not "opened up" as the rest of them are). -GONE-

Add $25 for the matte DragonHeart body, or $35 for the shiny (NON-slotted for Tritium vials) DragonHeart body (BLACK ONE IS GONE).

Please Paypal the appropriate amount for your order to mrbulk(at)gmail(dot)com and indicate here when you are done.  Please indicate your preferences for

1) which body you are ordering

2) which converter you want, and most importantly

3) your FF log-in name

Packaging and shipping to begin immediately since I don't has ta build'em any more (yee haw!).

Again - you will provide your own wire and solder, this is all that is required to build each of these lights.

So there ya has it...it's Fire Sale time at BulkWare!  Thank you all for your kind support over these past five years.


***************************************************************************


All machined from bare aluminum, the bodies will be beadblast-finished heads and tails with semi-shiny (machine finish) aluminum Control Modules.  The bodies are already configured and machined to accommodate - and will thus include -  LUXEON STARS ONLY (I have thousands and need to get rid of'em, they are all well-binned of course), your choice of converters (Fully Regulated "DragonHeart" style or DirectDiven V.2 "Cub" style), UCL lenses, McR-20 reflectors, o-rings, battery tube springs, etc.

In short, everything needed to build complete LionCubs save for ancillaries such wires, thermal compound, solder and a soldering iron (duh) that you yourself supply.

Please let me know here on this thread if you are interested and I'll go about seeing exactly how much in my parts stockpile I still have for however many y'all might want (there will probably be enough for just a couple dozen at most).  Might even have some HA3 ano'd OD Green Dragonheart bodies (4-pcs per body) laying around.  Like I said I am taking a SERIOUS break from making flashlights because:

1) there is really nothing technologically brand-new lately to dream up new lights with

2) the overseas guys are catching up (although I feel they are still far behind in areas such as electronic converters of the intuitive-to-use multiple-feature UI variety)

3) I need time to sort out some pressing real-life "lifestyle" issues

4) I need time to do a couple of exotic custom one-offs that I will be selling privately to, uh, private individuals, and finally...

5) there is still that NewFormat light I want to pursue someday.  Just not "today" - *SIGH*


So there ya has it - please sound off on this thread and I'll get a nice price worked out for these kits.


Title: Re: Any Interest In DIY LionCub "Kits"?
Post by: Steve L on November 12, 2008, 03:12:15 PM
Hi Mr Bulk,

I'm very interested in a Dragonheart and Cub(Bare if you have it) both with the DirectDiven V.2 "Cub" style converters.

Cheers,
Steve
Title: Re: Any Interest In DIY LionCub "Kits"?
Post by: arewethereyetdad on November 12, 2008, 03:15:33 PM
Charlie, I'd be interested in two bare Cub kits or at least two machine-finish CM's.   :thumbup:
Title: Re: Any Interest In DIY LionCub "Kits"?
Post by: MR Bulk on November 12, 2008, 03:18:20 PM
PAID IN FULL:

1) lumenator
2xCubs w/Regulated conv.
1xCub KNURLED w/Cub conv. (ONE-AND-ONLY ORIG. CUB IS GONE FOLKS)
1XGlossyBlk Dragon w/Reg. conv. (ONE-AND-ONLY NON-TRIT BLK. DRAG IS GONE TOO)

2) starfiretoo
2xCub w/Cub convs.
2xMatteBlk Dragon w/Cub convs.
1xStainless Dragon

3) SteveL
1xStainless Dragon

4) shuter
1xStainless Drag
2xCub w/Cub convs.
1xMatte OD Drag w/Cub conv.
2xGloss OD Drag w/Cub conv.

5) RPM
1xMatte OD Drag w/Cub conv.
1xMatte Black Drag w/Cub conv.

6) Likebright
1xStainless Drag

7) Glockboy
1xCub w/Cub conv.


Running totals:

Reg Cubs = 11 (of 20 total) NINE LEFT

EVERYTHING ELSE IS GONE, THANK YOU VERY MUCH!

Knurled CUB (one only) = 1 SOLD OUT

Gloss Black DRAG (one only) = 1 SOLD OUT

Matte Black Drag = 3 (of 3 total) SOLD OUT

Gloss OD Drag = 2 (of 2 total) SOLD OUT

Matte OD Drag = 5 (of 5 total) SOLD OUT

STAINLESS Drag = 4 (of 4 total) SOLD OUT
Title: Re: Any Interest In DIY LionCub "Kits"?
Post by: MR Bulk on November 12, 2008, 03:20:12 PM
SteveL, got you noted down for now.

Troy, you too, although the bods have already been beadblasted when they were produced (except for the CM sections which are smooth), but then bare Al is so easy to mirror polish (just ask Regs)...

And oh yeah, I'm providing them as complete kits only, not separate parts.
Title: Re: Any Interest In DIY LionCub "Kits"?
Post by: Steve L on November 12, 2008, 03:25:40 PM
I edited the probably out of my post. :D Also with the Cub circuit please.

Thanks,
Steve
Title: Re: Any Interest In DIY LionCub "Kits"?
Post by: arewethereyetdad on November 12, 2008, 07:53:17 PM
SteveL, got you noted down for now.

Troy, you too, although the bods have already been beadblasted when they were produced (except for the CM sections which are smooth), but then bare Al is so easy to mirror polish (just ask Regs)...

And oh yeah, I'm providing them as complete kits only, not separate parts.


Good 'nuf.  :thumbup:  Hope to chat with you soon via PM.
Title: Re: Any Interest In DIY LionCub "Kits"?
Post by: shuter on November 12, 2008, 08:20:42 PM


hi Charlie,

I would like:

Two LionCub Kits with the V.2 converters.

One DragonHeart Kit OD with V.2 converter.
Two Dragonheart Kits Black with V.2 converters.

Are the DragonHeart parts a complete "kit" like the Cub "Kits" ?
Does the V.2 converter fit and function properly in the DragonHeart?  If not, I would like the standard DragonHeart converters.
If there are any other color DragonHearts available I would like one of each?
If there is a Brass DragonHeart available I would Really, Really, Really like one?

Thanks, 
Gale
Title: Re: Any Interest In DIY LionCub "Kits"?
Post by: lumenator on November 13, 2008, 07:43:14 AM
Hello Charlie,

Please reserve the following for myself;
  2 LionCub kits with Fully Regulated converters
  1 LionCub kit knurled body with DirectDiven converter
  1 Dragonheart no trit any color with Fully Regulated converter

Thanks you very much for the offerings  :thumbup:

Regards,
Jesse
Title: Re: Any Interest In DIY LionCub "Kits"?
Post by: toby_pra on November 13, 2008, 08:08:29 AM
I come from overseas...

I would take one LinoCub Kit, with V2 converter.  :thumbup:
Title: Re: Any Interest In DIY LionCub "Kits"?
Post by: wallyrulz on November 13, 2008, 03:52:28 PM
I am interested in one kit depending on price...

1 lioncub with Dragonheart board
Title: Re: Any Interest In DIY LionCub "Kits"?
Post by: arewethereyetdad on November 13, 2008, 04:51:18 PM
I am interested in one kit depending on price...
1 lioncub with Dragonheart board

I'm pretty sure this is just to get an idea of how many might be interested.  No commitment on our part yet.  That true, Captain?   
Title: Re: Any Interest In DIY LionCub "Kits"?
Post by: Geologist on November 13, 2008, 05:49:38 PM
question for the experts - for these new fangled emitters - do they work better with the DD or the Regulated boards?

Also are the Mystery reflectors better?

No idea I might have enough parts sans board/control module/emitter and wanted to (as always) to get more flashlights.  Got open up some boxes and do some inventory!

BTW Hi wally!
Title: Re: Any Interest In DIY LionCub "Kits"?
Post by: fläshgreëniè on November 13, 2008, 06:53:26 PM
depending on price, I am interested in two lioncubs(preferable black???) with dragonheart boards
Title: Re: Any Interest In DIY LionCub "Kits"?
Post by: MorpheusT1 on November 13, 2008, 08:11:22 PM
I would be interested in a couple of bare sets.Maybe more depending on price.
With the original LionCub Converter.

I would prefer the bodies with knurling if any available.


 :thumbup:
Benny
Title: Re: Any Interest In DIY LionCub "Kits"?
Post by: starfiretoo on November 14, 2008, 05:19:53 PM
2 X LION CUB - CUB CONVERTER

2 X OD DRAGONHEART - CUB CONVERTOR

I REMEMBER YOU HAD SOME CHAMELEONS. ANY MORE OF THE 27MM REFLECTOR SIZE? 

WILL PAY BY MO OR CHECK.

ANYWAY, IT'S BEEN SAID BEFORE BUT AGAIN GOOD LUCK :thumbup:

Title: Re: Any Interest In DIY LionCub "Kits"?
Post by: glockboy on November 14, 2008, 06:30:26 PM
I'm in for one bare Cub kits, DirectDiven V.2 "Cub".
Thanks
Title: Re: Any Interest In DIY LionCub "Kits"?
Post by: MR Bulk on November 14, 2008, 09:43:33 PM

UPDATE 11-14-08:

Some pics for now, will get to updating the list once people commit (via Paypal) since there will be prices announced at the end of this post -


LionCub bods:
(http://i210.photobucket.com/albums/bb173/mrbulk/DSC01535.jpg)


Up Close - only ONE original knurled body (shown on bottom of pic) is available at higher cost (GONE), the other twenty will be as shown at top of pic:
(http://i210.photobucket.com/albums/bb173/mrbulk/DSC01530.jpg)


Lo and Behold, we got DragonHeart bods too -- notice that in the top row, the two on the right and on the bottom row the fourth on the right (GONE) are *SHINY*.  That is how they usually came, but the rest shown here have a matte-finished anodizing.  The three *SHINY* ones have NO TRIT SLOTS and will cost a little more, although I would think the matte ones are desirable as well simply for their "tactical-ness" for lack of a better word:
(http://i210.photobucket.com/albums/bb173/mrbulk/DSC01534.jpg)

Also note the top row lights are OD Green and the bottom row is Black except for the one on the far right which is a seventh OD Green.


Holy Cow, we still had STAINLESS DRAGONHEARTS???  These are COMPLETELY BUILT LIGHTS, and they simply turned up while going through my stuff:
(http://i210.photobucket.com/albums/bb173/mrbulk/DSC01536.jpg)

These four remaining Stainless Steel Dragons are (PRICE EDIT) $260 each plus shipping.

Now as for the selling price of the LionCub Kits, let's consider the componentry cost for each LionCub:

1) I paid $25 per circuit board

2) I paid $20 per McR-20 reflector

3) I paid as high as $14 for each Luxeon star as I always sought out and purchased the best bins available at the time

4) although I bought the dual-side AR-coated UCL lenses in *Bulk* (cool word, eh?), they retail for $7 from Flashlight Lens

5) the goldplated piano wire battery springs retail for $5

6) add another $5 for the o-rings and button covers and the total so far is

$25+$20+$14+$7+$5+$5 = $77 not yet counting the bodies

I am setting the price of each complete LionCub kit at only $99 (and I ASSURE you the bodies alone cost significantly more than $22 each!!!), and due to the losses at such a price I will require $5 to cover handling/packaging/shipping (in the U.S., contact me for international destinations as it will be more) plus $3 to cover Paypal fees so for simplicity's sake can we please just keep it to an even $107 delivered per each Cub kit regardless of number ordered, meaning two kits will be $214, etc.

SUCH a deal, I tell ya.

-GONE-Add $25 if you want the one Cub kit with the last available original LionCub body with the knurling and the lanyard hole in the tail.  But be warned, the bezel opening is still the original width (meaning not "opened up" as the rest of them are). -GONE-

Add $25 for the matte DragonHeart body, or $35 for the shiny (NON-slotted for Tritium vials) DragonHeart body (BLACK ONE IS GONE).

Please Paypal the appropriate amount for your order to mrbulk(at)gmail(dot)com and indicate here when you are done.  Please indicate your preferences for

1) which body you are ordering

2) which converter you want, and most importantly

3) your FF log-in name

Packaging and shipping to begin immediately since I don't has ta build'em any more (yee haw!).

Again - you will provide your own wire and solder, this is all that is required to build each of these lights.

So there ya has it...it's Fire Sale time at BulkWare!  Thank you all for your kind support over these past five years.

Title: Re: DIY LionCub (AND OTHER) "Kits" - PRICING ANNOUNCED
Post by: RPM on November 14, 2008, 11:10:06 PM


I'd like:

1 OD green, matte finish Dragon heart body set, Cub driver$132 ($107+25)
1 Black, matte finish Dragon heart body set, Cub driver$132 ($107+25)

Total of $264 on it's way


Title: Re: DIY LionCub (AND OTHER) "Kits" - PRICING ANNOUNCED
Post by: arewethereyetdad on November 14, 2008, 11:50:02 PM
Hmm, I gotta think about what I want.
Title: Re: DIY LionCub (AND OTHER) "Kits" - PRICING ANNOUNCED
Post by: starfiretoo on November 15, 2008, 12:22:27 AM
2 x Lion Cub - $214

2 x Matte Black DragonHeart - $264

TOTAL - $478

All with Cub drivers.

 :ppsent:
Thanks
Title: Re: DIY LionCub (AND OTHER) "Kits" - PRICING ANNOUNCED
Post by: lumenator on November 15, 2008, 03:25:39 AM
PP sent with email to follow
Title: Re: DIY LionCub (AND OTHER) "Kits" - PRICING ANNOUNCED
Post by: griff on November 15, 2008, 03:53:02 AM
2 lion cub kits                                                $214

+ $25x2    LionCub body with the knurling =         $50
                                         _____________________
                                                                  $264
                                              +%3  PP=    $7.92
                                   ________________________
                                                              $271.92 :ppsent:

Title: Re: DIY LionCub (AND OTHER) "Kits" - PRICING ANNOUNCED
Post by: shuter on November 15, 2008, 02:52:08 PM
I would like:

2- LionCub Kits with Cub driver     $107.00 ea =  $214.00

1 - SS DragonHeart                                         $260.00
                                       
1 - Matt DragonHeart Body                                  $25.00
1 - Shiny DragonHeart Body                                 $35.00
2 - Cub Drivers                                                    ?????
Totol Shipping?                                                    ?????

Do the DragonHeart Bodies coime with Reflectors, Lenses, Spring, Orings?  If not can I get them?  Is there a price for the complete DragonHeart Kit?  That is what I would like rather than the bodies shown above if there is.

If you could give me a total I will send Paypal.

Edit:  I have sent a preliminary Paypall for the two Cub kits, one SS DragonHeart, one Matt and one Shiny DragonHeart body.  $541.00  I need to know if there are Kit prices for the above DragonHeart bodies or if the parts need to be ordered seperately.  I am wanting DragonHeart Kits if available with Cub Drivers.  Please let me know and I will send along the additional funds once I know how much to send.

Edit:  I see the shiny DragonHeart bodies are gone.  Please ammend my order to: One OD Green and one Matt Black DragonHeart Body or Kit if available.


Title: Re: DIY LionCub (AND OTHER) "Kits" - PRICING ANNOUNCED
Post by: RPM on November 15, 2008, 04:28:54 PM


I'd like:

1 OD green, matte finish Dragon heart body set, Cub driver$132 ($107+25)
1 Black, matte finish Dragon heart body set, Cub driver$132 ($107+25)

Total of $264 on it's way

 :ppsent: ... hopefully I have the total correct!

Title: Re: DIY LionCub (AND OTHER) "Kits" - PRICING ANNOUNCED
Post by: MR Bulk on November 15, 2008, 11:07:56 PM

Thanks everyone, I'll get back to each of you right after I take my beauty nap (in prep for another danged graveshift tonight!).  Thanks again for all of your support.
Title: Re: DIY LionCub (AND OTHER) "Kits" - PRICING ANNOUNCED
Post by: Likebright on November 16, 2008, 12:43:45 AM
Charlie,
As the originator of the idea of the Stainless Steel Dragon Heart I would now like one.
Mike.  E-mail sent.
Title: Re: DIY LionCub (AND OTHER) "Kits" - PRICING ANNOUNCED
Post by: Steve L on November 16, 2008, 01:52:40 AM
Hi Charlie, :wave:

E-Mail and :ppsent: for 1 x Completely Built Stainless Steel DragonHeart. :thumbup:

Thanks,
Steve

Title: Re: DIY LionCub (AND OTHER) "Kits" - PRICING ANNOUNCED
Post by: starfiretoo on November 16, 2008, 02:21:47 AM
From the posts looks like there is one SS DragonHeart left?
I'll take the last one.
SS DragonHeart - $260.00
postage and PP fees - $15
Total - $275

:ppsent: THANKS
Title: Re: DIY LionCub (AND OTHER) "Kits" - PRICING ANNOUNCED
Post by: MR Bulk on November 16, 2008, 07:59:07 AM

Thanks guys, just got to work, will update this thread when I get my start-work priorities done...
Title: Re: DIY LionCub (AND OTHER) "Kits" - PRICING ANNOUNCED
Post by: griff on November 16, 2008, 09:06:00 AM

Thanks guys, just got to work, will update this thread when I get my start-work priorities done...

Would that have anything to do with DOnuts??
  Thanks for the refund and sorry for the misunderstanding
Title: Re: Any Interest In DIY LionCub "Kits"?
Post by: glockboy on November 16, 2008, 10:51:03 AM
 :ppsent:


I'm in for one bare Cub kits, DirectDiven V.2 "Cub".
Thanks

Title: Re: DIY LionCub (AND OTHER) "Kits" - PRICING ANNOUNCED
Post by: MR Bulk on November 16, 2008, 12:49:30 PM

Okay, all should be updated so far.  Griff, understood (and here we don't hit the donut shops, we hit the "plate lunch" shops, heh heh).

Glock, see my latest msg.
Title: Re: DIY LionCub (AND OTHER) "Kits" - PRICING ANNOUNCED
Post by: Likebright on November 16, 2008, 03:46:38 PM
 :ppsent:

For 1 SSDH
Mike
Title: Re: DIY LionCub (AND OTHER) "Kits" - PRICING ANNOUNCED
Post by: MR Bulk on November 16, 2008, 04:01:46 PM
Got it, Like-y.
Title: Re: DIY LionCub (AND OTHER) "Kits" - PRICING ANNOUNCED
Post by: MR Bulk on November 16, 2008, 10:09:32 PM

Okey-dokey, all Completed Orders have been packed, labeled, postage-stamped and dropped into the Big Blue Box at the post office.

Lemme know when y'all gets'em. :thumbsup:

Title: Re: DIY LionCub (AND OTHER) "Kits" - PRICING ANNOUNCED
Post by: Likebright on November 16, 2008, 10:27:49 PM
Thanks Charlie,
Will be watching the box.
I had figured my chances of getting one of these was zilch----
but here it comes.
Mike :blob9:
Title: Re: DIY LionCub (AND OTHER) "Kits" - PRICING ANNOUNCED
Post by: shuter on November 16, 2008, 10:47:01 PM
Charlie,

Order is now completed.  Thanks for the clarifications.  Paypal sent for additional balance due.  I'll be watching my mail!   :thumbup:
Title: Re: DIY LionCub (AND OTHER) "Kits" - PRICING ANNOUNCED
Post by: MR Bulk on November 17, 2008, 09:30:37 AM

And everything'll be packed and shipped out by tomorrow!

Title: Re: DIY LionCub (AND OTHER) "Kits" - PRICING ANNOUNCED
Post by: shuter on November 19, 2008, 04:26:41 AM

Well I have scored two LionCub kits and two DragonHeart kits.  So, now what?  Hehe.  I'm a bit out of my depth here.  I have never assembled a light and am wondering how to go about it.  Is there a pictorial/tutorial showing how to assemble a Cub or DragonHeart? 

Other questions that come to mind are:  What wire to use to use?  I want to update the emitter to a P4, What bin number will provide the whitest, brightest light using the Cub converter?  What VF is recommended?  Where do I get them?  What adhesive or insulating gel do I use to affix the Star?  What else do I need to know?

I really want to do these myself and am hoping you guys can help a newbe along with the process. 
Title: Re: DIY LionCub (AND OTHER) "Kits" - PRICING ANNOUNCED
Post by: lumenator on November 19, 2008, 06:45:47 AM
I'll take a Gloss OD Drag with no slots please,DD board please
PP shortly 107.00 + 35.00 = 142.00
Title: Re: DIY LionCub (AND OTHER) "Kits" - PRICING ANNOUNCED
Post by: MR Bulk on November 19, 2008, 07:09:00 PM

Well I have scored two LionCub kits and two DragonHeart kits.  So, now what?  Hehe.  I'm a bit out of my depth here.  I have never assembled a light and am wondering how to go about it.  Is there a pictorial/tutorial showing how to assemble a Cub or DragonHeart? 

Other questions that come to mind are:  What wire to use to use?  I want to update the emitter to a P4, What bin number will provide the whitest, brightest light using the Cub converter?  What VF is recommended?  Where do I get them?  What adhesive or insulating gel do I use to affix the Star?  What else do I need to know?

I really want to do these myself and am hoping you guys can help a newbe along with the process. 


Whoops, I forgot just one little detail thingy - questions are five bucks each, hee hee! :evil6:

Seriously I guess I will have to get an assembly manual up eventually.  But it should rightly involve pictures and such so it may be a little while...

lumenator I think we are sold out of those, see my e-mail reply to you.
Title: Re: DIY LionCub (AND OTHER) "Kits" - PRICING ANNOUNCED
Post by: shuter on November 19, 2008, 09:15:50 PM

"Seriously I guess I will have to get an assembly manual up eventually.  But it should rightly involve pictures and such so it may be a little while..."

I guess most of the others are experienced modders but I sure could use some guidence and pictures for my first one.  I appreciate your effort Charlie.
Title: Re: DIY LionCub (AND OTHER) "Kits" - PRICING ANNOUNCED
Post by: MR Bulk on November 19, 2008, 11:33:18 PM

"Seriously I guess I will have to get an assembly manual up eventually.  But it should rightly involve pictures and such so it may be a little while..."

I guess most of the others are experienced modders but I sure could use some guidence and pictures for my first one.  I appreciate your effort Charlie.


Shuter, I made a mistake, I do have the one gloss OD Dragon left and will commence to pack and ship it.  Sorry for the mix up.
Title: Re: DIY LionCub (AND OTHER) "Kits" - PRICING ANNOUNCED
Post by: MR Bulk on November 19, 2008, 11:38:07 PM

Post No. 3 updated to reflect remaining inventory of never-again-to-be-offered BulkWare flashlight kits...

Thank You for your support.
Title: Re: DIY LionCub (AND OTHER) "Kits" - PRICING ANNOUNCED
Post by: MR Bulk on November 20, 2008, 03:21:25 AM

"Seriously I guess I will have to get an assembly manual up eventually.  But it should rightly involve pictures and such so it may be a little while..."

I guess most of the others are experienced modders but I sure could use some guidence and pictures for my first one.  I appreciate your effort Charlie.


Shuter, I made a mistake, I do have the one gloss OD Dragon left and will commence to pack and ship it.  Sorry for the mix up.



Whoops, this message was meant for Lumenator.  Jess, if you could please reply to my last e-mail message and confirm this is what you wanted?
Title: Re: DIY LionCub (AND OTHER) "Kits" - PRICING ANNOUNCED
Post by: starfiretoo on November 20, 2008, 06:17:24 AM
Yup, arrived today. Thanks for the clips!
(http://img212.imageshack.us/img212/281/bulkvf8.jpg)
Title: Re: DIY LionCub (AND OTHER) "Kits" - PRICING ANNOUNCED
Post by: wallyrulz on November 20, 2008, 04:50:23 PM
PM Sent. 

and, Hey back to you Geo.  Hope all is well
Title: Re: DIY LionCub (AND OTHER) "Kits" - PRICING ANNOUNCED
Post by: lumenator on November 20, 2008, 09:03:44 PM

"Seriously I guess I will have to get an assembly manual up eventually.  But it should rightly involve pictures and such so it may be a little while..."

I guess most of the others are experienced modders but I sure could use some guidence and pictures for my first one.  I appreciate your effort Charlie.

Hey Charlie,

 :thumbup: that's the one,thank you

Jesse


Shuter, I made a mistake, I do have the one gloss OD Dragon left and will commence to pack and ship it.  Sorry for the mix up.



Whoops, this message was meant for Lumenator.  Jess, if you could please reply to my last e-mail message and confirm this is what you wanted?

Title: Re: DIY LionCub (AND OTHER) "Kits" - PRICING ANNOUNCED
Post by: georgemaggos on November 22, 2008, 11:05:43 PM
Hey Charles,

 
:illtakeit:


  I would like to buy 2 of the DIY Kits ~ 1 x Reg Cub w /Cub conv. + 1 x Matte OD Dragon w/ Cub conv.

BTW ~ If there are any pocket clips for these I would like those as well  :)
 
My forum name is the same as my real name  :wave:

 Thanks for your time & effort I appreciate it  :thumbsup:

 
:ppsent:

Sincerely,
George Maggos
Title: Re: DIY LionCub (AND OTHER) "Kits" - PRICING ANNOUNCED
Post by: MR Bulk on November 23, 2008, 05:43:30 AM
Hi George,

PP received, thanks!  Remaining inventory updated in post No. 4...
Title: Re: DIY LionCub (AND OTHER) "Kits" - PRICING ANNOUNCED
Post by: zoran on November 23, 2008, 11:04:51 PM
1 Cub Kit + Cub converter
1 Matte OD Drag + Reg converter

Paypal sent.

Thanks.
Title: Re: DIY LionCub (AND OTHER) "Kits" - PRICING ANNOUNCED
Post by: MorpheusT1 on November 23, 2008, 11:11:00 PM
Please Reserve two LionCub Kits for me Charlie,
Regular LionCub Drivers please.Not the Regulated version.
+ one extra LionCub Driver if i you have a spare.


Will make contact next week regarding payment.


Best Regards,
Benny
Title: Re: DIY LionCub (AND OTHER) "Kits" - PRICING ANNOUNCED
Post by: griff on November 24, 2008, 01:33:30 AM
 one cub  kit with Regular LionCub Driver
PP sent $107
 Thanks Charlie!
Title: Re: DIY LionCub (AND OTHER) "Kits" - PRICING ANNOUNCED
Post by: MR Bulk on November 25, 2008, 01:44:57 AM
Okay the music convention thing we had this weekend is all done, I will be packing and shipping the most recent orders, thanks everyone for their patience.
Title: Re: DIY LionCub (AND OTHER) "Kits" - PRICING ANNOUNCED
Post by: MR Bulk on November 25, 2008, 01:48:42 AM
Please Reserve two LionCub Kits for me Charlie,
Regular LionCub Drivers please.Not the Regulated version.
+ one extra LionCub Driver if i you have a spare.


Will make contact next week regarding payment.


Best Regards,
Benny


Benny I hear ya, "can do" on the complete kits only.
Title: Re: DIY LionCub (AND OTHER) "Kits" - PRICING ANNOUNCED
Post by: MorpheusT1 on November 25, 2008, 10:51:00 PM
 :thumbup:

Super !



Im a little short right now,but i definatively want them.
I miss my cubbie wubbie!

My plan is to mod one with a Cree XR-E I just love the tight beam of a XR-E in a modified McR20.
The other .... its always good to have a spare :D
Title: Re: DIY LionCub (AND OTHER) "Kits" - PRICING ANNOUNCED
Post by: MR Bulk on November 26, 2008, 05:47:59 AM

Got it Benny. :thumbsup:
Title: Re: DIY LionCub (AND OTHER) "Kits" - PRICING ANNOUNCED
Post by: griff on November 29, 2008, 05:50:25 PM
one cub  kit with Regular LionCub Driver
PP sent $107
 Thanks Charlie!
Have these shipped?
Title: Re: DIY LionCub (AND OTHER) "Kits" - PRICING ANNOUNCED
Post by: MR Bulk on November 30, 2008, 01:24:24 AM
one cub  kit with Regular LionCub Driver
PP sent $107
 Thanks Charlie!
Have these shipped?


Oh yes.  They left day before Thanksgiving.
Title: Re: DIY LionCub (AND OTHER) "Kits" - PRICING ANNOUNCED
Post by: georgemaggos on December 02, 2008, 05:13:18 AM
Hey Charlie,

 My kits arrived today in Illinois  :thumbup: Thanks alot for your time & effort I appreciate it  :)

 Now if you or someone else who knows how to assemble these could please post some clear close up photos & some written directions of how to build these kits that would be very helpful thanks in advance for the added help  :-[

 
(http://i95.photobucket.com/albums/l158/georgemaggos/Mr%20Bulk/IMG_1907a.jpg)





(http://i95.photobucket.com/albums/l158/georgemaggos/Mr%20Bulk/IMG_1901a.jpg)



 Sincerely,
George Maggos
Title: Re: DIY LionCub (AND OTHER) "Kits" - PRICING ANNOUNCED
Post by: georgemaggos on December 12, 2008, 08:16:44 PM
I sent these 2 DIY kits off to be built out for me, they came out great  :)

 Thanks alot Fred :thumbup:
 I appreciate it  ;)

 
Awesome Lights  :D
 Last pic my new Bulk's with my Reeve Umfaan  8)


(http://i95.photobucket.com/albums/l158/georgemaggos/Mr%20Bulk/IMG_2014a.jpg)




(http://i95.photobucket.com/albums/l158/georgemaggos/Mr%20Bulk/IMG_2011a.jpg)




(http://i95.photobucket.com/albums/l158/georgemaggos/Mr%20Bulk/IMG_1998a.jpg)

 ~George
Title: Re: DIY LionCub (AND OTHER) "Kits" - PRICING ANNOUNCED
Post by: X_Marine on December 13, 2008, 01:29:19 AM
Well I'm glad I had a little time on my hands and dropped by.. Good to hear from ya Charlie..  :hugme:

I'll grab a cpl of these as they never get old. :blinking:

On my way to PP.. brb..

I know you said complete kits only but thought I would throw out that I need 1 (one) Brass CM, just incase
someone reading might have an extra they would sell or trade.  :illtakeit:

Many thanks and all the best with your latest endeavors..  :thumbup:
X_Marine/BillyD..

OH ya, PP sent.. :ppsent:

I forgot, boards, one each, thanks.

Title: Re: DIY LionCub (AND OTHER) "Kits" - PRICING ANNOUNCED
Post by: dave on December 16, 2008, 04:50:03 PM
Mr Bulk,,  I would like to purchase one regular lion Cub Kit. ($107.00)  Last I heard there were eleven left.  Although I've purchased using PayPal before, I'm not sure how to do it in this form. My Member name is - - - --- dave
Title: Re: DIY LionCub (AND OTHER) "Kits" - PRICING ANNOUNCED
Post by: X_Marine on December 17, 2008, 09:14:44 PM
Mr Bulk,,  I would like to purchase one regular lion Cub Kit. ($107.00)  Last I heard there were eleven left.  Although I've purchased using PayPal before, I'm not sure how to do it in this form. My Member name is - - - --- dave
Hi Dave, just check 1st page for his PP info and proper info to include. Send payment & info, wahlah,, you will be a happy camper.  :D

Many thanks Charlie,
All received in excellent condition.

Wish you and yours the best for the holidays.  :thumbup:
X/BillyD..
Title: Re: DIY LionCub (AND OTHER) "Kits" - PRICING ANNOUNCED
Post by: RocketTomato on February 23, 2009, 02:32:33 AM
Hi! I am way late to the party but I would be interested in purchasing a kit if any are still available. I was very interested in a Dragonheart but I see they are all gone.  :(
Title: Re: DIY LionCub (AND OTHER) "Kits" - PRICING ANNOUNCED
Post by: starfiretoo on February 23, 2009, 03:40:40 AM
Great 1st post. Welcome to F-F :thumbup:
Hi! I am way late to the party but I would be interested in purchasing a kit if any are still available. I was very interested in a Dragonheart but I see they are all gone.  :(
Title: Re: DIY LionCub (AND OTHER) "Kits" - PRICING ANNOUNCED
Post by: RocketTomato on February 26, 2009, 05:21:18 AM
Thanks for the warm welcome Startfiretoo. I still have my fingers crossed in hopes of obtaining one of these kits.
Title: Re: DIY LionCub (AND OTHER) "Kits" - PRICING ANNOUNCED
Post by: lumafist on March 12, 2009, 01:34:28 AM
Hey Charlie...!

These still available.....?
How much shipping do you need to Sweden...?
It`s about time I get myself one of these beutes......!




Thanks...!
Title: Re: DIY LionCub (AND OTHER) "Kits" - PRICING ANNOUNCED
Post by: MR Bulk on March 12, 2009, 06:42:40 AM
One left, $40 to Sweden.
Title: Re: DIY LionCub (AND OTHER) "Kits" - PRICING ANNOUNCED
Post by: MorpheusT1 on March 23, 2009, 12:42:11 AM
Anything left Charlie?


I totally forgot about this thread after i asked you to hold those kits for me...
Im sorry.



Best Regards,
Benny
Title: Re: DIY LionCub (AND OTHER) "Kits" - PRICING ANNOUNCED
Post by: MR Bulk on March 23, 2009, 04:39:24 AM

Sorry, all gone.
Title: Re: DIY LionCub (AND OTHER) "Kits" - SOLD OUT!
Post by: AngryAmerican on April 11, 2009, 01:40:01 AM
Anyone know the driver and LED in the stainless Dragons? I just picked one up. Thanks.   :thumbup:
Title: Re: DIY LionCub (AND OTHER) "Kits" - SOLD OUT!
Post by: MR Bulk on April 11, 2009, 05:18:08 AM
Fully regulated driver and SSC P4 LED.
Title: Re: DIY LionCub (AND OTHER) "Kits" - SOLD OUT!
Post by: AngryAmerican on April 11, 2009, 08:11:24 PM
Thanks Charlie.  :wave: